5 mm x 9 mm x 3 mm ISB MR95ZZ deep groove ball bearings

Outer Ring Shape:Flat; Preload Mark:C3; Inner/Outer Ring Material:Steel; Width B(mm):17; Types:Expansion correction; Seal, Shield Symbols:LLB; Size Standards:Metric System; I.D. d(Ø):25; Days to Ship:Quote; Basic Dynamic Load Rating(N):2120;

D:80 mm; Fatigue limit load, Cu:1.13 kN; rs min:1.5 mm; Max operating temperature, Tmax:350 °C; f0:13.2; d:35 mm; Radial clearance class:> C5; D1:70.1 mm; d1:46.2 mm; Brand:SNR;

N:16mm; B:30.2 mm; Z:33.4 mm; S:11 mm; T min.:-20 °C; s1:33.4 mm; T max.:100 °C; B1:43.7 mm; A2:54.7 mm; d:45 mm;

D - Cup Outer Diameter:3 in; e - ISO Factor2:0.3; Db - Cup Backface Backing Diameter:2.68 in; Da - Cup Frontface Backing Diameter:2.80 in; r - Cup Backface To Clear Radius1:0.030 in; Y - ISO Factor3:1.98; Design Units:Imperial; Cg - Geometry Factor:0.0725; Series:2700; C - Cup Width:0.7500 in;

S:6 mm; A:26 mm; e:17 mm; A1:9.5 mm; A2:33 mm; H:99 mm; T max.:100 °C; J:76.5 mm; Recommended tightening torque for set screw:3.2 Nm; B:22 mm;

L1:50 mm; C:52.5 kN; Z:91.3 mm; S:14.9 mm; E:25 mm; A:70 mm; H2:138 mm; L:150 mm; T max.:100 °C; A1:40 mm;

Holder Surface Treatment:Not Provided; RoHS:6; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Type:Bearings with Housin; Type:Bearings with Housin; Days to Ship:8 Days; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type;

Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing I.D. d(mm):25; Bearing Retained:Yes (with retaining; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Electroless Nickel P; Number of Bearings:Double; Days to Ship:8 Days;

d - Bore:16.1250 in; C0 - Static Radial Rating:729000 lbf; R - Cone Backface To Clear Radius3:0.25 in; G1 - Heat Generation Factor (Roller-Raceway):4045.6; Ab - Cage-Cone Frontface Clearance:0.23 in; a - Effective Center Location4:0.69 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:74200

L:120 mm; C:31.85 kN; d1:62 mm; B:42.8 mm; J:85 mm; E:22 mm; H2:106 mm; Z:24.5 mm; T min.:-20 °C; Designation of bearing:EX209G2L3;

L:163 mm; L1:49 mm; A1:27 mm; Weight:1.45 kg; Designation of housing:PE207N-; H:47.6 mm; H2:93 mm; B:42.9 mm; G:R1/8"; J:126 mm;

Bearing I.D. d(mm):12; Bearing Used:Deep Groove Ball Bea; Width T(mm):30 ～ 40; Bearing Retained:No; Bearing Retained:No; Flange O.D. H(φ):56; Number of Bearings:Double; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Number of Bearings:Double;

S:18.2 mm; H2:41 mm; L1:225 mm; C:19.5 kN; Recommended tightening torque for set screw:8 Nm; s1:34.1 mm; G:R1/8"; H:98 mm; Designation of bearing:EX206-19G2; d:30.16 mm;

S:27.7 mm; C0:29.2 kN; L1:70 mm; Designation of housing:P211N-; L:219 mm; J:171 mm; B:55.4 mm; C:43.55 kN; B1:71.3 mm; d1:74.5 mm;

Nlim (grease):13,000 rpm; ra max:1 mm; da max:37 mm; Radial clearance class:C4; Brand:NTN; Min operating temperature, Tmin:-25 °C; Mass:0.12 kg; Static load, C0:8.3 kN; da min:35 mm; Dynamic load, C:13.2 kN;